Project Number Date
test_Tails_ISO_20531-early-reporting-of-bad-devices 13 11 Dec 2024, 15:32

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 71 1 3 0 0 75 9 1 10 22:10.180 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
28.453
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 9.041
And I temporarily create a 4 GiB disk named "gptfat" 0.083
And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.491
And I plug USB drive "gptfat" 2.708
When I start Tails Installer 10.075
Then I am told by Tails Installer that the destination device "is too small" 0.053
After features/support/hooks.rb:326 2.010
After features/support/hooks.rb:100 0.001
Tags: @product
20.151
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.401
And I temporarily create a 7200 MiB disk named "temp" 0.048
And I start Tails Installer 8.644
But a suitable USB device is not found 0.030
When I plug USB drive "temp" 2.660
Then the "temp" USB drive is selected 0.142
When I unplug USB drive "temp" 0.201
Then a suitable USB device is not found 0.021
After features/support/hooks.rb:326 2.051
After features/support/hooks.rb:100 0.000
Tags: @product
2:35.189
Before features/support/hooks.rb:269 0.009
Given I have started Tails from DVD without network and logged in 8.123
And I temporarily create a 7200 MiB disk named "install" 0.051
And I create a gpt partition with a vfat filesystem on disk "install" 6.479
And I plug USB drive "install" 3.522
And I install Tails to USB drive "install" by cloning 1:58.214
Then the running Tails is installed on USB drive "install" 12.662
And there is a random seed on USB drive "install" 6.026
But there is no persistence partition on USB drive "install" 0.109
After features/support/hooks.rb:326 1.310
After features/support/hooks.rb:100 0.133
Tags: @product
2:29.734
Before features/support/hooks.rb:269 0.003
Given I have started Tails from DVD without network and logged in 8.457
And I temporarily create a 7200 MiB disk named "install" 0.054
And I plug USB drive "install" 2.593
And I install Tails to USB drive "install" by cloning 1:57.543
Then the running Tails is installed on USB drive "install" 15.024
And there is a random seed on USB drive "install" 5.991
But there is no persistence partition on USB drive "install" 0.069
After features/support/hooks.rb:326 1.321
After features/support/hooks.rb:100 0.162
Tags: @product
3:2.007
Before features/support/hooks.rb:269 0.002
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.351
And I create a file in the Persistent directory 0.333
And I temporarily create a 7200 MiB disk named "install" 0.048
And I create a gpt partition with a vfat filesystem on disk "install" 6.632
And I plug USB drive "install" 2.794
And I install Tails with Persistent Storage to USB drive "install" by cloning 2:8.720
Then the running Tails is installed on USB drive "install" 18.927
And there is a random seed on USB drive "install" 5.980
And there is a persistence partition on USB drive "install" 0.074
And the USB drive "install" contains the same files as my persistent storage 3.142
After features/support/hooks.rb:326 2.450
After features/support/hooks.rb:100 0.145
Tags: @product
2:52.109
Before features/support/hooks.rb:269 0.006
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.200
And I temporarily create a 7200 MiB disk named "install" 0.040
And I plug USB drive "install" 2.974
And I install Tails to USB drive "install" by cloning 1:58.255
Then the running Tails is installed on USB drive "install" 31.475
And there is a random seed on USB drive "install" 6.075
And there is no persistence partition on USB drive "install" 0.087
After features/support/hooks.rb:326 1.984
After features/support/hooks.rb:100 0.096
Tags: @product
2:52.669
Before features/support/hooks.rb:269 0.004
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.479
And I have started Tails from DVD without network and logged in 8.890
And I clone USB drive "__internal" to a temporary USB drive "install" 1.210
And I plug USB drive "install" 2.615
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 2:1.082
Then the running Tails is installed on USB drive "install" 19.831
And there is a random seed on USB drive "install" 7.493
And there is no persistence partition on USB drive "install" 0.066
After features/support/hooks.rb:326 1.895
After features/support/hooks.rb:100 0.120
Tags: @product @uefi
3:17.537
Scenario Booting Tails from a USB drive in UEFI mode
Before features/support/hooks.rb:269 0.003
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.873
And I power off the computer 0.593
And the computer is set to boot in UEFI mode 0.373
When I start Tails from USB drive "__internal" with network unplugged and I login 3:1.697
try_for() 
try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuGRUB_Bullseye.png", "TailsBootMenuGRUB_Bookworm.png"] on the screen
./features/support/helpers/screen.rb:240:in `rescue in wait_any'
./features/support/helpers/screen.rb:224:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:434:in `the_computer_boots'
./features/step_definitions/common_steps.rb:448:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'
Then Tails is running from USB drive "__internal" 0.000
And the boot device has safe access rights 0.000
And Tails has started in UEFI mode 0.000
After features/support/hooks.rb:326 10.589 
SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 00:58:48)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/13/artifact/build-artifacts/00:58:48_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/13/artifact/build-artifacts/00:58:48_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_20531-early-reporting-of-bad-devices/13/artifact/build-artifacts/00:58:48_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal
After features/support/hooks.rb:100 0.084
Tags: @product
2:28.803
Before features/support/hooks.rb:269 0.002
Given I have started Tails from DVD without network and logged in 8.568
And I plug and mount a USB drive containing a Tails USB image 47.882
And I create a 7200 MiB disk named "usbimage" 0.157
And I plug USB drive "usbimage" 2.417
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:29.777
After features/support/hooks.rb:326 3.492
After features/support/hooks.rb:100 0.108
Tags: @product
1:43.523
Before features/support/hooks.rb:269 0.003
Given a computer 0.252
And I start Tails from USB drive "usbimage" with network unplugged and I login 1:41.819
Then Tails is running from USB drive "usbimage" 0.403
And the label of the system partition on "usbimage" is "Tails" 0.356
And the system partition on "usbimage" is an EFI system partition 0.242
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.169
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.088
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.096
And the system partition on "usbimage" has the expected flags 0.095
After features/support/hooks.rb:326 0.796
After features/support/hooks.rb:100 0.008