And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:13.968
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.577
And
I accept adding "cowsay" to Additional Software
4.522
And
Additional Software is correctly configured for package "cowsay"
0.947
And
I shutdown Tails and wait for the computer to power off
6.436
And
I start Tails from USB drive "__internal" with network unplugged
1:4.500
And
I enable persistence
13.239
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
28.725
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.869
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.091
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.058
And
I can open the Additional Software configuration window from the notification
3.247
And
I shutdown Tails and wait for the computer to power off
2:3.298
And
I start Tails from USB drive "__internal" with network unplugged
1:5.191
And
I enable persistence
14.071
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
30.569
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.876
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090