And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.367
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.964
And
I accept adding "cowsay" to Additional Software
6.948
And
Additional Software is correctly configured for package "cowsay"
0.829
And
I shutdown Tails and wait for the computer to power off
6.362
And
I start Tails from USB drive "__internal" with network unplugged
1:5.061
And
I enable persistence
12.853
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
27.637
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.087
And
available upgrades have been checked
0.166
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
8.123
And
I can open the Additional Software configuration window from the notification
2.957
And
I shutdown Tails and wait for the computer to power off
19.570
And
I start Tails from USB drive "__internal" with network unplugged
1:11.744
And
I enable persistence
12.979
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
28.826
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.602
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090