And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.449
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.541
And
I accept adding "cowsay" to Additional Software
5.422
And
Additional Software is correctly configured for package "cowsay"
0.971
And
I shutdown Tails and wait for the computer to power off
8.452
And
I start Tails from USB drive "__internal" with network unplugged
1:8.561
And
I enable persistence
14.175
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
31.477
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.599
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.100
And
the network is plugged
0.080
And
available upgrades have been checked
1.318
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.056
And
I can open the Additional Software configuration window from the notification
3.202
And
I shutdown Tails and wait for the computer to power off
2:2.671
And
I start Tails from USB drive "__internal" with network unplugged
1:6.047
And
I enable persistence
14.955
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
30.237
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.999
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.219
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097