And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.852
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.497
And
I accept adding "cowsay" to Additional Software
5.206
And
Additional Software is correctly configured for package "cowsay"
0.879
And
I shutdown Tails and wait for the computer to power off
6.558
And
I start Tails from USB drive "__internal" with network unplugged
1:4.367
And
I enable persistence
13.933
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
28.437
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.062
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.087
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.061
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.550
And
I can open the Additional Software configuration window from the notification
3.295
And
I shutdown Tails and wait for the computer to power off
2:3.371
And
I start Tails from USB drive "__internal" with network unplugged
1:4.280
And
I enable persistence
13.568
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
28.529
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.440
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104