And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:14.754
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.049
And
I accept adding "cowsay" to Additional Software
6.786
And
Additional Software is correctly configured for package "cowsay"
0.919
And
I shutdown Tails and wait for the computer to power off
6.562
And
I start Tails from USB drive "__internal" with network unplugged
1:6.665
And
I enable persistence
12.954
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
30.758
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.697
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.070
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.182
And
I can open the Additional Software configuration window from the notification
3.227
And
I shutdown Tails and wait for the computer to power off
2:3.438
And
I start Tails from USB drive "__internal" with network unplugged
1:4.949
And
I enable persistence
14.344
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
31.143
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.425
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
the network is plugged
0.107
Then
the Additional Software upgrade service has started
0.214
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098