And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:10.326
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.234
And
I accept adding "cowsay" to Additional Software
4.196
And
Additional Software is correctly configured for package "cowsay"
0.878
And
I shutdown Tails and wait for the computer to power off
6.318
And
I start Tails from USB drive "__internal" with network unplugged
1:2.759
And
I enable persistence
12.079
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.109
And
I log in to a new session
27.049
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.625
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.096
And
available upgrades have been checked
0.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.359
And
I can open the Additional Software configuration window from the notification
2.626
And
I shutdown Tails and wait for the computer to power off
2:1.797
And
I start Tails from USB drive "__internal" with network unplugged
1:1.497
And
I enable persistence
13.058
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
28.290
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.492
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089