And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.726
And
I configure APT to prefer an old version of cowsay
0.038
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.949
And
I accept adding "cowsay" to Additional Software
6.235
And
Additional Software is correctly configured for package "cowsay"
0.998
And
I shutdown Tails and wait for the computer to power off
6.439
And
I start Tails from USB drive "__internal" with network unplugged
1:2.335
And
I enable persistence
12.108
And
I configure APT to prefer an old version of cowsay
0.053
And
I disable the tails-virt-notify-user.service user unit
0.132
And
I log in to a new session
42.395
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.364
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.076
And
available upgrades have been checked
1.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.801
And
I can open the Additional Software configuration window from the notification
3.326
And
I shutdown Tails and wait for the computer to power off
2:6.962
And
I start Tails from USB drive "__internal" with network unplugged
1:2.951
And
I enable persistence
22.725
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
45.414
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.101
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079