And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.329
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.814
And
I accept adding "cowsay" to Additional Software
5.420
And
Additional Software is correctly configured for package "cowsay"
0.966
And
I shutdown Tails and wait for the computer to power off
6.325
And
I start Tails from USB drive "__internal" with network unplugged
58.147
And
I enable persistence
12.368
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
36.792
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.276
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.072
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.395
And
I can open the Additional Software configuration window from the notification
2.432
And
I shutdown Tails and wait for the computer to power off
18.203
And
I start Tails from USB drive "__internal" with network unplugged
57.943
And
I enable persistence
10.718
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
36.693
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.924
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088