And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:35.657
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
40.985
And
I accept adding "cowsay" to Additional Software
5.128
And
Additional Software is correctly configured for package "cowsay"
1.173
And
I shutdown Tails and wait for the computer to power off
6.849
And
I start Tails from USB drive "__internal" with network unplugged
1:13.946
And
I enable persistence
15.095
And
I configure APT to prefer an old version of cowsay
0.044
And
I disable the tails-virt-notify-user.service user unit
0.131
And
I log in to a new session
48.505
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.140
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.080
And
available upgrades have been checked
0.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
12.655
And
I can open the Additional Software configuration window from the notification
2.648
And
I shutdown Tails and wait for the computer to power off
19.138
And
I start Tails from USB drive "__internal" with network unplugged
1:4.848
And
I enable persistence
14.623
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
43.953
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080