And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.617
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.562
And
I accept adding "cowsay" to Additional Software
5.007
And
Additional Software is correctly configured for package "cowsay"
0.660
And
I shutdown Tails and wait for the computer to power off
4.200
And
I start Tails from USB drive "__internal" with network unplugged
37.240
And
I enable persistence
9.527
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.789
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.014
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.531
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
13.519
And
I start Tails from USB drive "__internal" with network unplugged
37.662
And
I enable persistence
9.079
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.141
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.257
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054