And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.923
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.166
And
I accept adding "cowsay" to Additional Software
3.511
And
Additional Software is correctly configured for package "cowsay"
0.945
And
I shutdown Tails and wait for the computer to power off
6.679
And
I start Tails from USB drive "__internal" with network unplugged
1:5.066
And
I enable persistence
13.752
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.111
And
I log in to a new session
40.308
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.099
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.701
And
I can open the Additional Software configuration window from the notification
2.624
And
I shutdown Tails and wait for the computer to power off
2:6.987
And
I start Tails from USB drive "__internal" with network unplugged
1:2.920
And
I enable persistence
14.692
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.736
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.050
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.192
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108