And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.701
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.280
And
I accept adding "cowsay" to Additional Software
6.632
And
Additional Software is correctly configured for package "cowsay"
0.956
And
I shutdown Tails and wait for the computer to power off
6.516
And
I start Tails from USB drive "__internal" with network unplugged
1:1.491
And
I enable persistence
13.719
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
36.841
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.573
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.086
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.981
And
I can open the Additional Software configuration window from the notification
2.622
And
I shutdown Tails and wait for the computer to power off
2:7.811
And
I start Tails from USB drive "__internal" with network unplugged
58.717
And
I enable persistence
18.084
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
39.179
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.410
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098