And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.940
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.277
And
I accept adding "cowsay" to Additional Software
5.558
And
Additional Software is correctly configured for package "cowsay"
0.891
And
I shutdown Tails and wait for the computer to power off
6.433
And
I start Tails from USB drive "__internal" with network unplugged
58.413
And
I enable persistence
13.563
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.120
And
I log in to a new session
40.728
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.098
And
available upgrades have been checked
2.264
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.207
And
I can open the Additional Software configuration window from the notification
3.135
And
I shutdown Tails and wait for the computer to power off
2:8.891
And
I start Tails from USB drive "__internal" with network unplugged
1:1.594
And
I enable persistence
12.537
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
40.776
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.808
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.083
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089