And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.424
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.628
And
I accept adding "cowsay" to Additional Software
4.078
And
Additional Software is correctly configured for package "cowsay"
0.500
And
I shutdown Tails and wait for the computer to power off
4.088
And
I start Tails from USB drive "__internal" with network unplugged
32.129
And
I enable persistence
10.498
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
6.388
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.024
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.314
And
I can open the Additional Software configuration window from the notification
2.386
And
I shutdown Tails and wait for the computer to power off
12.527
And
I start Tails from USB drive "__internal" with network unplugged
31.491
And
I enable persistence
10.165
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.805
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058