And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.329
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.071
And
I accept adding "cowsay" to Additional Software
3.111
And
Additional Software is correctly configured for package "cowsay"
0.932
And
I shutdown Tails and wait for the computer to power off
6.528
And
I start Tails from USB drive "__internal" with network unplugged
1:3.829
And
I enable persistence
12.045
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
43.237
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.066
And
available upgrades have been checked
1.180
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.768
And
I can open the Additional Software configuration window from the notification
2.923
And
I shutdown Tails and wait for the computer to power off
2:1.997
And
I start Tails from USB drive "__internal" with network unplugged
1:2.474
And
I enable persistence
11.914
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
46.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.559
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.222
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102