And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:58.969
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.725
And
I accept adding "cowsay" to Additional Software
6.633
And
Additional Software is correctly configured for package "cowsay"
0.848
And
I shutdown Tails and wait for the computer to power off
6.263
And
I start Tails from USB drive "__internal" with network unplugged
1:3.878
And
I enable persistence
12.298
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
45.065
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.770
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.071
And
available upgrades have been checked
0.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.406
And
I can open the Additional Software configuration window from the notification
2.957
And
I shutdown Tails and wait for the computer to power off
12.797
And
I start Tails from USB drive "__internal" with network unplugged
1:4.102
And
I enable persistence
11.383
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
47.431
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.077
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094